Walter TB Temperature Fuse Introduction

Walter TB temperature fuse is one of the temperature fuse products produced by Walter Electronics Co., Ltd., mainly used for overcurrent protection in circuits. The TB series temperature fuses come in various specifications, such as TB 2A 250V AC and TU3A 250V AC. They have a delicate appearance, good sealing performance, sensitive and reliable operating temperature, minimal current impact, and vibration resistance. They are mainly used in various appliances such as electric fans, rice cookers, electric frying pans, and disinfection cabinets

The main parameters of the Huade TB temperature fuse include volume, current, voltage, temperature, safety certification, etc. For example, a typical product specification of the TB series is 6.2 * 6.7 mm volume, 2A current, 250V voltage, operating temperature range of 102 ℃ to 150 ℃, and has passed multiple international safety certifications such as CUL, VDE, CCC, KC, PSE, etc

When installing the Huade TB temperature fuse, the following points should be noted:

1. Ensure that the installation position of the fuse is appropriate to avoid stress transfer to the fuse due to vibration or the position of other components
2. During the installation process, excessive temperature should be avoided from being applied to the fuse, especially during welding, the fuse should be cooled as soon as possible to ensure its performance is not affected
3. Fuses should be used at the specified rated voltage, current, and specified temperature, and attention should be paid to their maximum continuous temperature tolerance

When using the Huade TB temperature fuse, the following precautions should be followed:

1. Temperature fuses should be used within the specified parameters to ensure compliance with the specifications of the type of fuse being used
2. After installing the fuse, ensure that the ambient temperature does not rise above its maximum operating temperature after the fuse is blown
3. It is not recommended to use temperature fuses in machines with humidity or liquid levels exceeding 95%
4. The temperature fuse should be installed in a location that can sense the heat source of the fuse, to avoid direct contact with the hot wire causing the fuse to melt
5. Avoid using parallel circuits or continuous voltage and current to increase the current flow, in order to avoid damaging the internal contacts of the fuse

In summary, the Huade TB temperature fuse is a reliable circuit protection component with multiple specifications and excellent performance. The correct installation and usage method is the key to ensuring circuit safety. During use, it is necessary to strictly follow the product instructions and relevant regulations to ensure the effectiveness of the fuse and the safety of the circuit