Walter TU Temperature Fuse Introduction

Walter TU temperature fuse is a thermal sensitive component mainly used in household or industrial electrical products to detect temperature abnormalities and cut off circuits. It can cut off the circuit in a timely manner to avoid fire when electrical or electronic devices are not operating normally and overheating occurs. The main characteristics of the Huade TU temperature fuse include compact structure, high insulation performance, and the ability to react quickly to heat

Huade TU temperature fuses come in various specifications, such as the TU115 model, which includes parameters such as rated operating temperature and rated voltage. These fuses are widely used in transformers, explosion-proof tubes, exhaust fans, electric fans, low-power motors, chargers, adapters, secondary battery packs, household combined gas heaters, fluorescent lamps, various heating devices, etc

When installing the Wald TU temperature fuse, the following points should be noted:

1. When using lead bending, please bend from a certain distance from the root to avoid damaging the root or lead
2. When using screw fixation or terminal fixation for circuit breaking, poor contact caused by mechanical creep should be avoided
3. The connector should be able to operate reliably within the working range of the electrical product, without displacement due to vibration and the position of other components
4. When welding leads, please limit the heating humidity to the minimum and avoid applying high temperatures on the thermal fuse
5. Thermal fuses can only be used at the specified rated voltage, current, and specified temperature, with special attention paid to the maximum continuous temperature that the thermal fuse can withstand

When designing, suitable temperature fuses should be selected based on the specific needs and conditions of the application. This includes the required rated current, voltage, maximum operating temperature, disconnection temperature, and other parameters. Considering the working environment, such as temperature, humidity, vibration, chemical corrosion, etc., to ensure that the selected temperature fuse can work normally under these conditions. When installing temperature fuses, the manufacturer's installation guidelines should be followed to ensure correct installation, so that they can effectively perform thermal detection and protection

In summary, Walter TU temperature fuses are important circuit protection components, and their correct selection and installation are crucial for ensuring the safe operation of electrical equipment. When selecting and using temperature fuses, one should fully consider their specifications and working environment, and strictly follow the manufacturer's recommendations for operation