What are the parameters of TLV1117-50IDCYR

The parameters of TLV1117-50IDCYR voltage regulator mainly include the following aspects:

1、 Basic parameters
Brand and Manufacturer: TI (Texas Instruments)
Packaging form: SOT-223-4
Product Type: Low Dropout Voltage Regulator (LDO)
RoHS certification: Yes
Installation style: SMD/SMT (Surface Mount Technology)
2、 Electrical parameters
Output voltage: 5V
Output current: maximum 800mA
Maximum input voltage: 15V
Minimum input voltage: 6.4V (the minimum input voltage required to ensure the normal operation of the voltage regulator)
Static current: 15mA (current consumption without load)
Return voltage: 1.2V (the difference between the minimum input voltage required to start the voltage regulator and the output voltage)
Input bias current: 5mA (bias current at the input end)
Line adjustment rate: 0.2% (the impact of input voltage changes on output voltage stability)
Load regulation: 0.4% (impact of load current variation on output voltage stability)
3、 Physical parameters
Height: 1.6mm
Length: 6.5mm
Width: 3.5mm
Unit weight: 112mg
4、 Working temperature and environmental parameters
Minimum operating temperature:- 40°C
Maximum operating temperature:+ 125°C
Humidity sensitivity: Yes (sensitive to humidity, need to pay attention to moisture prevention during storage and handling)
5、 Other parameters
Output type: Fixed (fixed voltage output)
Number of output terminals: 1
Polarity: Positive (positive voltage output)
Working power supply current: 80 μ A (current consumption in standby or low-power mode)
Power Supply Rejection Ratio (PSRR): 75dB (a measure of the regulator's ability to suppress input power noise)
These parameters collectively define the operating characteristics and scope of application of the TLV1117-50IDCYR regulator, which helps designers make the right decisions when selecting and using the regulator. In practical applications, it is necessary to comprehensively consider these parameters based on specific circuit requirements and working environments.