EBB-M-0R0003F, EBB-M-0R0005F, EBB-M-0R001F, EBB-K-0R002F, EBB-K-0R003F, EBB-K-0R005F, EBB-K-0R010F, with unique design, four pins, two pins for passing current, the other two pins for measuring voltage. This
resistance has a wide resistance range, small temperature coefficient, good linearity, stable frequency characteristics.
Neng 5930 Kelvin shunt resistance using precision manufacturing process, can provide high precision resistance value, with a low error rate and temperature drift, long-term stable use, resistance value will not change significantly, can ensure the accuracy and stability of measurement. The temperature coefficient of the Kelvin shunt resistance is low, which means that its resistance value does not change with the temperature. The Kelvin shunt resistance can be used to accurately measure the current, and to calculate the current value by measuring the voltage drop. This method is usually used to measure the current in the power system, and to determine the required resistance value range according to the actual application requirements.
Generally speaking, the wider the range of energy resistance, the greater the choice, and the choice of kelvin shunt resistance with less error rate can improve the accuracy of measurement. The error rate is usually expressed as a percentage, and a smaller error rate implies a higher accuracy. Note temperature coefficient: selecting kelvin shunt resistance with small temperature coefficient can improve the accuracy of measurement. The temperature coefficient is usually expressed as ppm / ℃. The smaller the temperature coefficient means that the resistance value is less affected by the temperature change, and choosing the Kelvin shunt resistance with better stability can guarantee the accuracy of long-term use. Stability is usually evaluated by long-term stability test. According to the required frequency characteristics according to the actual application, if it is necessary to be measured under the high frequency signal, it is necessary to choose the Kelvin shunt resistance with good frequency characteristics, and the well-known brands and reasonable Kelvin shunt resistance can guarantee the quality and cost performance. It is recommended to choose manufacturers with a good reputation and cost-effective products.
