Automotive chip resistor
Derating curve
Automobile thick film resistor, resistance 1 ohm to 10 MOhm, size from 0201 to 2512, 1%, 5%, high power. Special long-term termination provides high power. The high stability of these rectangular resistors is a key design for any electronic application, especially for the automotive industry.
Range
This specification applies to all sizes of square fixed chip resistors and ruthenium base materials.
characteristic
Aec-q200 compliance.
Highly reliable multilayer electrode structure.
Special construction shall be carried out to prevent sulfur-containing vulcanization environment
Compatible with all welding processes.
100% CCD detection.
application program
Automobile industry.
Telecommunication equipment.
Radio and tape recorder, TV tuner.
Digital camera, watch, pocket calculator.
Computers, instruments.
Medical equipment.
build
Part number
Part No.: cr-03fa7 -- 10 R
Standard electrical specifications
term
type The rated power is 70 ° C, and the rated current is connected across Operating temperature range. Max。 working voltage Max。 Overload voltage Resistance range Cell receptor
(PPM /°C)
±1% (E24 E96) ±5% (E24)
CR-01 (0201) 1/20W - 55 ~ + 125°C 25 v 50 v 1Ω- 10 mΩ ±200
Jump shot 1: - 0Ω(< 50 mΩ) -
CR-02 (0402) 1/16W - 55 ~ + 155°C 50 v 100 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot 1: - 0Ω(< 50 mΩ) -
CR-03 (0603) 1/10W - 55 ~ + 155°C 75 v 150 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot 1: - 0Ω(< 50 mΩ) -
CR-05 (0805) 1/8W - 55 ~ + 155°C 150 v 300 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot 2: - 0Ω(< 50 mΩ) -
CR-06 (1206) 1/4W - 55 ~ + 155°C 200 v 400 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot 2: - 0Ω(< 50 mΩ) -
CR-10 (1210) 1/2W - 55 ~ + 155°C 200 v 400 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot: 2.5 - 0Ω(< 50 mΩ) -
CR-0A (2010) 3/4W - 55 ~ + 155°C 200 v 400 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot: 3.5 - 0Ω(< 50 mΩ) -
CR-12 (2512) 1 w - 55 ~ + 155°C 250 v 500 v 1Ω- 9.76Ω
10Ω- 1 mΩ
1.02 mΩ- 10 mΩ ±200
±100
±200
Jump shot 4: - 0Ω(< 50 mΩ) -
Pulse bearing capacity
Acceptance is a transition where the ultimate resistance is less than 1% of the initial value. The maximum allowable impulse voltage for power applications is limited.
Scheme recommendation: Guangjie 1206 alloy resistance
